Home > Products > high power and outdoor laser > Outdoor waterproof laser
1.Water proof laser with IP55 rating designs. Double housing designs which can prevent harmful dust accumulation, water jetting from any direction doesn't have any harms.
2.Made of water proof materials and special process designs to make sure the exposed components (fans, socket, screws, etc.) working well.
3.Full pure laser with more stable performance and longer working life. Diode solid-state (DSS) laser is that when power on, the diode will have laser output directly. It can work properly between -30°C and 40°C.
4.Beam diameter <8mm, divergence <1.5mrad.
5.Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
6.Graphics & Effects: Beam show and animated graphics show patterns.
7.TF Card storage build in program and downloading program.
8.Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal and the shutter will block the laser output automatically, so as to avoid the single beam coming out.
9.Applicable for all kinds of large-scale outdoor performances, outdoor lighting projects.
Warning: Don’t project to the crowd and don’t project a single beam to the aircraft flight route!!!
  • Details
  • Parameter

Technical Specification

1.    Voltage: AC90~250V/AC, 50HZ/60HZ

2.    Rated Power: 700W

3.    Laser: Power 20W, Wavelength 525nm, Beam dia.<8*8mm, Divergence<1.5mrad

4.    Laser level: Class 4 laser

5.    Waterproof Level: IP55

6.    Work Environment: outdoor and indoor, -30 °C --40 °C

7.       Scanner: 30KPPS High-speed optical scanner, ±30° big scanning angle, power supply:DC+24V/4A + DC-24V/2A

8.    Working Modes: PC Control, DMX512 (19 CH), PRG(SD card program), ILD(SD card program), Sound Active,


9.    Play Program Format: .ild laser show document

10. Safety Configure: Security protection, Laser key switch, SFS Control(scanner fail safety control ON/OFF), flying rings bolt

11. Interface: DB25-ILDA interface for PC control, RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments), 3 pins XLR jack for DMX,

12. Machine dimension: 375*475*220(H)mm

13. Machine Weight: 38Kg

Contact us

Shenzhen LAYU Optoelectronic Technology Co. Ltd 
Address:4/F, Building B,Yicheng Industrial Park,
Tiegang Village,Xixiang Town, Bao'an District.
Shenzhen China 

David Wong
Post code: 518102 
Tel: (0086 755) 21634172
Fax: (0086 755) 27696756 
Mobile/wechat: 0086 13824366934


QQ: 1978735129

Wechat Code

Online Service

Online ServiceService Hours:9:00-24:00

Domestic QQ:

foreign QQ :