Home > Products > Club laser
Full pure diode RGB laser with more stable performance and longer working lifespan.
Diode solid-state (DSS) laser is that when power on, the diode will have laser output directly. The working temperature is -30℃- 50℃.
  • Details
  • Parameter

2. Three floors designs, more compacted and dust proof designs.

1) Top floor: Optical and electric components. Dust proof designs, no maintenance costs. Electric components on the top floor, easy to install and replace. The heat is transmitted to the heat sink.

2) Middle floor: big and efficient heat sink floor. Heat sink volume is 30% of the whole housing. High speed fans will blow away the heat and keep the machine in good working condition.

3) Bottom floor: Laser power supply and scanner power supply floor.

3. Laser beam diameter and divergence: <7mm, <1.5mrad
4. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
5. Laser module is with TEC control system. Make sure the diodes are in best working temperature and prolong their lifespan. Also the users can know about the TEC working status by the LED signals at the back side of machine.  
6. Use LCD color display technology, TF card functions. All the pattern direction and sizes, sensitivity, color setting, scanner speed are settled by button. Easy to operate and understand. Lower the hardware failure rates.
Play Mode: ILDA PC ControlDMX512 (18 channels),  Sound Active, AUTO, Master/Slave.
PC control: Compatible ILDA laser show software with ILDA interface. Use electronic switches to convert full ILDA signal.
Safety configure: Single Beam Protection System (can switch ON or OFF; single beam protection system is very important system for high power laser lights), laser ON-OFF switch, laser remote interlock, flying rings bolt.
Safety intelligent: Automatically identify ILDA or built-in program mode. Master/slave mode, DMX512 and PC control mode, will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal , so as to avoid the single beam coming out.
Power Supply: 100~250V, 50/60HZ, 300W
Applications: Discos, dance halls, bars, nightclubs and a variety of large performance venues, it can run at low temperatures outsides.


Green Laser


Machine   Size

Machine   Weight


Power:> 10W

wavelength: 520nm

Beam   dia.: 6*7mm








Contact us

Shenzhen LAYU Optoelectronic Technology Co. Ltd 
Address:4/F, Building B,Yicheng Industrial Park,
Tiegang Village,Xixiang Town, Bao'an District.
Shenzhen China 

David Wong
Post code: 518102 
Tel: (0086 755) 21634172
Fax: (0086 755) 27696756 
Mobile/wechat: 0086 13824366934


QQ: 1978735129

Wechat Code

Online Service

Online ServiceService Hours:9:00-24:00

Domestic QQ:

foreign QQ :