1. High power laser with dust-proof and anti-lampblack design. The housing is three independent layer structure design which can make the laser system more stable. Top layer is optical floor without any interface. It is sealed completely. Middle layer is big radiator layer with high speed fan to blow the heat away. The bottom floor is electrical layer.

The whole projector reaches IP61 protection level.(Protection against dust and lampblack, water drop to the shell has no impact).

1. Full pure laser with more stable performance and longer working life. It can work properly between -30°C and 40°C.

2. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.

3. Operation interface: LCD display.

4. TF Card storage builds in program and downloading program.

5. Safety Feature: Single beam protection system (ON and OFF selection choice. It is very important to have these safety function for high power laser), key lock. 

6. Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser automatically, so as to avoid the single beam coming out.

7. Applicable for clubs, stage show, outdoor landscape lighting show, outdoor event, etc.

Warning: Don’t scan to the crowd and don’t project a single beam to the aircraft flight route!!！

Technical Specification

1.Voltage: AC90~250V/AC, 50HZ/60HZ，max consumption power: 500W 

2.Laser module: 

AL20RGB: Red: 6W, wavelength 638nm; Green: 6W, wavelength 520nm; Blue: 10W, wavelength 440nm.

           Beam dia. <6.5*5.5(H) mm, Divergence<1.5mrad

3.Laser life: >10000 hours

4.Laser level: Class 4 laser

5.Waterproof Level: IP61

6.Work Environment: outdoor and indoor, -30 °C --40 °C

7.Scanner: 

The highest quality of optical scanner, high speed and high precision, high stability and long life design.

>30KPPS ILDA @8°. Max scanning angle is 60°. Signal input voltage ±5V   

Mirror 12*14mm/X and 20*10mm/Y, maximum accommodate laser spot: 7 (W)*8(H) mm

8.Working Modes: PC Control, DMX512, PRG(TF card program), ILD(TF card program), Sound Active, AUTO

Option: PANGOLIN FB4 control system, additional SFS single-point protection function

9.TF card play file format: supporting standard ILDA file which is with “.ild “.

10.Interface: 

3 pins XLR jack for DMX;

DB25-ILDA interface for PC control, RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments),

11.Machine dimension:300(L)*380(W)*220(H)mm           

12.Net Weight: 19.5Kg