1. Two floors designs, more compacted and much lighter.

1) Top floor: big heat sink floor. The high speed fans will blow away the heat and keep the machine in good working temperature.

2) Bottom floor: Optical and electric components. Dust proof designs, no maintenance costs. Electric components on the bottom floor, easy to install and replace. The heat is transmitted to the heat sink.

2. RGB beam diameter and divergence: <5mm, <1.5mrad
3. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
4. Use LCD display technology, SD card functions. All the pattern sizes, sensitivity, color setting, scanner speed and mirror image, etc are settled by button. Easy to operate and understand. Lower the hardware failure rates.

◆Play Mode: ILDA PC Control，DMX512 (18 channels),  Sound Active, AUTO, Master/Slave.

◆PC control: Compatible ILDA laser show software with ILDA interface. Use electronic switches to convert full ILDA signal.

◆Safety configure: Single Beam Protection System(can switch ON or OFF; single beam protection system is very important system for high power laser lights), laser ON-OFF switch, laser remote interlock, flying rings bolt.

◆Safety intelligent: Automatically identify ILDA or built-in program mode. Master/slave mode, DMX512 and PC control mode, will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal , so as to avoid the single beam coming out.

◆Power Supply: 100~250V, 50/60HZ, 50W
◆Applicable for Disco, Clubs, KTV, Pub, Bar, family party, etc.